Data and equipment
The BMW S 1000 R
The S 1000 R is deeply emotive from the first second. Performance enthusiasts can confirm that our dynamic Roadster can get your hear racing with the numbers, data, and facts alone. All of the equipment that makes the R what it is can be found on this page.
Technical data
Engine
Rated output
125 kW (170 hp) at 11,000 rpm
Emission control
Closed-loop 3-way catalytic converter
Type
Oil/water-cooled, four-cylinder, four-stroke, in-line engine with four valves per cylinder
Bore x stroke
80 mm x 49.7 mm
Capacity
999 cc
Max. torque
84 lbs-ft at 9,250 rpm
Compression ratio
12.5 : 1
Mixture control
Electronic intake pipe injection / digital engine management system: BMS-O with throttle-by-wire
Exhaust emission standards
EU 5+
Performance / fuel consumption
Maximum speed
over 200 km/h
Fuel consumption per 100 km based on WMTC
6.2 l
CO2 emission based on WMTC
144 g/km
Fuel type
Premium unleaded (max. 5 % ethanol, E5), 98 ROZ/RON, 93 AKI
Electrical system
Alternator
Permanent magnet alternator with 450 W (nominal power)
Battery
12 V / 8 Ah, maintenance-free
Power transmission
Clutch
Multiplate clutch in oil bath, anti-hopping clutch, with self-reinforcement
Gearbox
Claw-shifted 6-speed gearbox integrated in the transmission housing
Drive
Chain 525 17/45
Traction control
BMW Motorrad DTC
Chassis / brakes
Frame
Bridge-type frame, cast aluminium, co-supporting engine
Front wheel location / suspension
Upside-down telescopic fork, diameter 45 mm, spring preload, rebound and compression stages adjustable
Rear wheel location / suspension
Aluminium swing arm, full floater pro, compression and rebound damping adjustable, adjustable spring preload
Suspension travel, front / rear
120 mm / 117 mm
Castor
97.6 mm
Steering head angle
65.8°
Wheels
Aluminium cast wheels
Tire, front
120/70 ZR17
Tire, rear
190/55 ZR17 (with M wheels: 200/55 ZR17)
Brake, front
Twin disc brake, diameter 320 mm, 4-piston fixed caliper
Brake, rear
Single disc brake, diameter 220 mm, 1-piston floating caliper
Rim, front
3.50 x 17"
Rim, rear
6.00 x 17"
ABS
BMW Motorrad Integral ABS (partial integral)
Dimensions / weights
Seat height at unladen weight
32.7" (seat low: 31.9"; seat high: 33.5")
Inner leg curve at unladen weight
72.2" mm (seat low: 71.5"; seat high: 73.1")
Usable tank volume
16.5 l
Reserve
approx. 4 l
Length
2,085 mm
Width
812 mm
Dry weight
177 kg
Unladen weight, road ready, fully fuelled
199 kg (with M package incl. M forged wheels: 196 kg)
1)
Permitted total weight
407 kg
Payload (with standard equipment)
208 kg
1) According to Guideline (EU) 168/2013 with all operating fluids, with standard equipment and refuelled with min. 90% of the usable fuel tank capacity.
